| DISCHARGE VALVES MCD SERIES |
 |
- Applications: Constant Speed Applications, Where Intake Unloaders are Not Present
The Discharge Valve is Controlled by a Pilot Device that Signals the Normally Closed Valve to Open at the Unload Pressure. When Open, the Discharge Valve Vents the Discharge Line Air to Atmosphere. When System Pressure Drops to Load Pressure, the Pilot Valve Closes the Discharge Valve and the Compressor Returns to Normal Operation
- Construction: C360 Machined Body, Stainless Steel Spring, Viton Diaphragm
- Maximum Operating Temperature: 450ºF
Part No. |
Discharge
Inlet |
Pilot Inlet |
Vent |
Flow
(SCFM) |
Max. Operating Pressure |
MCD1818 |
1/8 NPT |
1/8 FNPT |
1/4 FNPT |
20 |
250 PSI |
MCD2518C |
1/4 Compression |
MCD2518 |
1/4 FNPT |
MCD5018 |
1/2 FNPT |
1/4 FNPT |
1/2 FNPT |
60 |
500 PSI |
|
| PRESSURE CONTROL REGULATOR MCPC SERIES |
 |
- Applications: Designed to be Installed into the Head of a Small Compressor (Less than 2HP) Direct Drive, Tankless; Where a Variable Pressure Relief Valve is Required
- A Micrometer Type Scale Allows for Easy & Accurate Adjustment from 0-100 PSI
- Construction: Brass body & Internals, Stainless Steel Poppet with Fluorocarbon O-Ring
- Nylon Knob
- Maximum Temperature: 250˚F
- Maximum Flow 6 SCFM at 100 PSI
Part No |
Range |
MCPC-25 |
10-100 PSI Adjustable |
|
| FILLER VALVE MCTV SERIES |
|
- Applications: Use Wherever a Method of Inflating a Tank with a Standard Air Chuck is Required
- Construction: Brass Valve Core with Viton® and Teflon® Seals
- Black Plastic Cap Included
- Maximum Temperature: 250˚F
- Maximum Pressure: 250 PSI
- 1/8” NPT
Part No |
Height |
MCTV-12 |
1.38 |
|
|
|
- Applications: Compressor Receivers, Radiators and Pool Equipment Where Stem Removal
is Not a Requirement.
- Construction Brass Body & Stem with Zinc Plated Steel Handle
- Maximum Pressure 200 PSI
- Maximum Temperature 200 ˚F
- Everseal 483 Sealant Standard
- Available Sizes: 1/8”, 1/4”, 3/8”, 1/2”
Part No. |
NPT
(In) |
DCE-12 |
1/8 |
DCE-25 |
1/4 |
DCE-38 |
3/8 |
DCE-50 |
1/2 |
|
DRAIN COCKS DT SERIES |
|
- Applications: Designed for Applications where the Traditional Drain cock is Easily Damaged
- Opens Easily and Closes with Minimum Effort
- Construction: Brass Body & Knurled Brass Stem
- Nitrile O-Ring Ensures a Bubble Tight Seal
- Maximum Pressure: 200 PSI
- Maximum Temperature: 250˚F
- Everseal 483 Sealant Standard
- 1/4” Connection
|
DRAIN COCK with PULL CORD MCDP & MCDM SERIES |
|
- Applications: Industrial and Automotive
- Brass Stem Tilts to Open the Valve at Minimum Pull Cord Force
Stainless Steel Spring Returns the Stem to Positively Seal
Against the Nitrile O-Ring when Force on the Cord is Release
- Construction: Brass Body, Washer and Stem
- Maximum Pressure: 200 PSI
- Maximum Temperature: 200˚F
- Standard Cable Length 5 FT
Part No. |
Cable Length |
MCDP25 |
60” |
MCDM25 |
36” |
|
AIR AUTOMATIC TANK DRAIN MCWV |
|
An Air Operated Automatic Tank Drain Valve. It Removes System Condensation When
Actuated at the Load and Unload Pressures.
|
- For Use on Compressors 5hp and Smaller
- Compact Design
- Solid Brass Body and Screened Inlet Port
- Construction: C360 Machined Body, Inlet Screen, Stainless Steel
Spring, Viton Diaphragm and Seals
- Maximum Operating Pressure: 500 PSIG
- Maximum Temperature: 450ºF
|
|
|
AIR AUTOMATIC TANK DRAIN with INSTALLATION KIT MCWV-1-1K
|
|
An Installation Kit Includes Everything You Need to Get the MCWV-1
Automatic Tank Drain Up and Running
- The Kit Includes the MCWV-1 Drain Valve with Push-In Fitting Installed
- Push-to-Connect T, Petcock
- 8 ft. of Nylon Tubing
- Installation Instructions that Cover Most Compressor Applications
|
|
|
|
Smart Start Eliminates Compressor Starting Problems, It Automatically Allows the Compressor Motor to Reach Full Speed Prior to Running Under Loaded Conditions
The Smart Start Accomplishes a Loadless Start by Controlling the Compressor Inlet. Simply Replace the Standard Inlet Filter on the Compressor with the Smart Start and Starting Problems Disappear
|
|
Benefits
- Smart Start Reduces Amperage Draw During Start Up and Eliminates Tripped Circuit Breakers
- Compensates for Starting Voltage Drops and Allows the Use of Multiple Tools on the Same Circuit
- Worry Free Operation Cold Weather and Extension Cords Won’t Stop Compressor from Starting. Eliminates the Need for Unloaders that Blow System Air to Atmosphere and Increase Pump
Up Time
- Construction: Nylon Body, 302 Stainless Steel Spring, Nitrile Diaphragm,
45 PPI Foam Filter
- Maximum Operation Temp: 300ºF
|
|
|
SHUTTLE CONTROL VALVE MCSCV
|
|
A Shuttle Control Valve Designed for Applications Where it is Necessary to Control One Device From Two Sources - MCSCV
- Features a Positive Sealing Piston, Brass Body Construction
- 600 PSI Maximum Working Pressure
|
|
|
|
Part No |
NPT |
|
FPT |
MCBG3020 |
1/4 |
|
